INTERNATIONAL REFERENCES
Egm
B8
En
CuSn8
DIN CEN
CW453K
ASTM(CDA)
C52100
AFNOR
CuSn9P
BS
PB104
JIS
C5212
MAIN CHARACTERISTICS
CuSn8 strips provide a better corrosion resistance compared to bronze with lower tin-content, combined with higher strength. It is wear resistant, has excellent spring properties, good cold forming and soldering properties. CuSn8 is used for springy applications where high strength and wearresistance are required. Special characteristics such as superfine particle size or thermalmechanical stress relieving improve mechanical properties and provide increased strength and greater malleability.
It is resistant to seawater and industrial atmosphere. Largely insensitive to stress corrosion cracking.
CHEMICAL COMPOSITION
Cu
[%]
Rest
Al
[%]
-
Fe
[%]
≤ 0,1
Ni
[%]
≤ 0,2
P
[%]
0,01 - 0,4
Pb
[%]
≤ 0,02
Sn
[%]
7,5 - 8,5
Zn
[%]
≤ 0,2
Σ other
[%]
≤ 0,2
FABRICATION PROPERTIES
COMPLIANCE
PHYSICAL PROPERTIES
Density | 8.80 g/cm3 |
Electrical Conducivity | 7.5 MS/m |
Electrical Conducivity | 13 IACS % |
Thermal Conducivity | 67 W/mK |
MECHANICAL PROPERTIES
Temper | Tensile Strength Rm [N/mm2] |
Yeld Strength Rp0.2 [N/mm2] |
Elongation A50 [%] |
Hardness HV10 |
Grain size [mm] |
---|---|---|---|---|---|
R370 | 370-450 | ≤ 300 | ≥ 50 | - | - |
H090 | - | - | - | 90-120 | - |
R450 | 450-550 | ≥ 280 | ≥ 20 | - | - |
H135 | - | - | - | 135-175 | - |
R540 | 540-630 | ≥ 460 | ≥ 13 | - | - |
H170 | - | - | - | 170-200 | - |
R600 | 600-690 | ≥ 530 | ≥ 5 | - | - |
H190 | - | - | - | 190-220 | - |
R660 | 660-750 | ≥ 620 | ≥ 3 | - | - |
H210 | - | - | - | 210-240 | - |
R740 | ≥ 740 | ≥ 700 | ≥ 2 | - | - |
H230 | - | - | - | ≥ 230 | - |
Please note: the above values are to be considered in compliance with UNI-EN 1652.
TYPES AND FORMAT AVAILABILITY
Horizontal axis | |
---|---|
Thickness | da 0,2 a 3,00 mm |
Widht | da 340 a 1050 mm |
Internal diameter | 300 / 400 / 500 mm |
External diameter | <1500 mm |
Vertical axis | |
---|---|
Thickness | da 0,2 a 3,00 mm |
Widht | da 4 a 500 mm |
Internal diameter | 100 / 140 /300 / 400 / 500 mm |
External diameter | <1500 mm |
Drums | |
---|---|
Thickness | da 0,2 a 2,00 mm |
Widht | da 4 a 60 mm |
Internal diameter | 300 / 400 / 500 mm |
External diameter | <1000 mm |
Multistrips | |
---|---|
Thickness | da 0,2 a 1,5 mm |
Widht | da 4 a 60 mm |
Internal diameter | 300 / 400 / 500 mm |
External diameter | <1500 mm |
Please note: The dimensions indicated are to be considered purely indicative. Specific requirements regarding width, thickness, internal and / or external diameter, must be evaluated and agreed upon when ordering.
OTHER SERVICES
Our Company offers a wide range of additional services, helping to satisfy the most varied needs. Surface treatments, like galvanic tinning, silvering, gold plating, as well selective plating, in order to improve the electrical and surface behavior in critical component conditions.