INTERNATIONAL REFERENCES
Egm
B5
En
CuSn5
DIN CEN
CW451K
ASTM(CDA)
C51000
AFNOR
-
BS
PB102
JIS
C5102
MAIN CHARACTERISTICS
CuSn5 provides an excellent combination of strength, excellent formability and hardness. It has a good electrical conductivity and corrosion resistance. Soldering and brazing properties are excellent. Special characteristics such as superfine particle size or thermal-mechanical stress relieving improve mechanical properties and provide increased strength and greater malleability.
CuSn5 has a good resistance to seawater, different agents and industrial atmosphere. It is in a large extend resistant to pitting corrosion.
CHEMICAL COMPOSITION
Cu
[%]
Rest
Al
[%]
-
Fe
[%]
≤ 0,1
Ni
[%]
≤ 0,2
P
[%]
0,01 - 0,4
Pb
[%]
≤ 0,02
Sn
[%]
4,5 - 5,5
Zn
[%]
≤ 0,2
Σ other
[%]
≤ 0,2
FABRICATION PROPERTIES
COMPLIANCE
PHYSICAL PROPERTIES
Density | 8.85 g/cm3 |
Electrical Conducivity | 11 MS/m |
Electrical Conducivity | 19 IACS % |
Thermal Conducivity | 96 W/mK |
MECHANICAL PROPERTIES
Temper | Tensile Strength Rm [N/mm2] |
Yeld Strength Rp0.2 [N/mm2] |
Elongation A50 [%] |
Hardness HV10 |
Grain size [mm] |
---|---|---|---|---|---|
R310 | 310-390 | ≤ 250 | ≥ 45 | - | - |
H075 | - | - | - | 75-105 | - |
R400 | 400-500 | ≥ 240 | ≥ 14 | - | - |
H120 | - | - | - | 120-160 | - |
R490 | 490-580 | ≥ 430 | ≥ 8 | - | - |
H160 | - | - | - | 160-190 | - |
R550 | 550-640 | ≥ 510 | ≥ 4 | - | - |
H180 | - | - | - | 180-210 | - |
R630 | 630-720 | ≥ 600 | ≥ 2 | - | - |
H200 | - | - | - | 200-230 | - |
R690 | ≥ 690 | ≥ 670 | - | - | - |
H220 | - | - | - | ≥ 220 | - |
Please note: the above values are to be considered in compliance with UNI-EN 1652.
TYPES AND FORMAT AVAILABILITY
Horizontal axis | |
---|---|
Thickness | da 0,2 a 3,00 mm |
Widht | da 340 a 1050 mm |
Internal diameter | 300 / 400 / 500 mm |
External diameter | <1500 mm |
Vertical axis | |
---|---|
Thickness | da 0,2 a 3,00 mm |
Widht | da 4 a 500 mm |
Internal diameter | 100 / 140 /300 / 400 / 500 mm |
External diameter | <1500 mm |
Drums | |
---|---|
Thickness | da 0,2 a 2,00 mm |
Widht | da 4 a 60 mm |
Internal diameter | 300 / 400 / 500 mm |
External diameter | <1000 mm |
Multistrips | |
---|---|
Thickness | da 0,2 a 1,5 mm |
Widht | da 4 a 60 mm |
Internal diameter | 300 / 400 / 500 mm |
External diameter | <1500 mm |
Please note: The dimensions indicated are to be considered purely indicative. Specific requirements regarding width, thickness, internal and / or external diameter, must be evaluated and agreed upon when ordering.
OTHER SERVICES
Our Company offers a wide range of additional services, helping to satisfy the most varied needs. Surface treatments, like galvanic tinning, silvering, gold plating, as well selective plating, in order to improve the electrical and surface behavior in critical component conditions.