INTERNATIONAL REFERENCES
Egm
CuSn015
En
CuSn0,15
DIN CEN
CW117C
ASTM(CDA)
C14415
AFNOR
-
BS
-
JIS
-
MAIN CHARACTERISTICS
CuSn0,15 is a low Tin (Sn) special alloy that combines low cost with highest conductivity. The total cost for finish products are often equal to brass due to excellent conditions for stamping scrap. Typical applications are male connectors and fuse boxes.
CuSn0,15 has good corrosion resistance in natural atmosphere (also sea air) and industrial atmosphere. In different waters and neutral saline solutions, it exhibits better resistance to corrosion through abrasion and pitting than SF-Cu.
CHEMICAL COMPOSITION
Cu
[%]
Rest
Al
[%]
-
Fe
[%]
≤ 0,02
Ni
[%]
≤ 0,02
P
[%]
≤ 0,015
Pb
[%]
-
Sn
[%]
0,1 - 0,15
Zn
[%]
≤ 0,1
Σ other
[%]
≤ 0,1
FABRICATION PROPERTIES
COMPLIANCE
PHYSICAL PROPERTIES
Density | 8.93 g/cm3 |
Electrical Conducivity | 51 MS/m |
Electrical Conducivity | 88 IACS % |
Thermal Conducivity | 350 W/mK |
MECHANICAL PROPERTIES
Temper | Tensile Strength Rm [N/mm2] |
Yeld Strength Rp0.2 [N/mm2] |
Elongation A50 [%] |
Hardness HV10 |
Grain size [mm] |
---|---|---|---|---|---|
R250 | 250-320 | ≥ 200 | ≥ 9 | - | - |
H060 | - | - | - | 60-90 | - |
R300 | 300-370 | ≥ 250 | ≥ 4 | - | - |
H085 | - | - | - | 85-110 | - |
R360 | 360-430 | ≥ 300 | ≥ 3 | - | - |
H105 | - | - | - | 105-130 | - |
R420 | 420-490 | ≥ 350 | ≥ 2 | - | - |
H120 | - | - | - | 120-140 | - |
Please note: the above values are to be considered in compliance with UNI-EN 1652.
TYPES AND FORMAT AVAILABILITY
Horizontal axis | |
---|---|
Thickness | da 0,2 a 3,00 mm |
Widht | da 340 a 1050 mm |
Internal diameter | 300 / 400 / 500 mm |
External diameter | <1500 mm |
Vertical axis | |
---|---|
Thickness | da 0,2 a 3,00 mm |
Widht | da 4 a 500 mm |
Internal diameter | 100 / 140 /300 / 400 / 500 mm |
External diameter | <1500 mm |
Drums | |
---|---|
Thickness | da 0,2 a 2,00 mm |
Widht | da 4 a 60 mm |
Internal diameter | 300 / 400 / 500 mm |
External diameter | <1000 mm |
Multistrips | |
---|---|
Thickness | da 0,2 a 1,5 mm |
Widht | da 4 a 60 mm |
Internal diameter | 300 / 400 / 500 mm |
External diameter | <1500 mm |
Please note: The dimensions indicated are to be considered purely indicative. Specific requirements regarding width, thickness, internal and / or external diameter, must be evaluated and agreed upon when ordering.
OTHER SERVICES
Our Company offers a wide range of additional services, helping to satisfy the most varied needs. Surface treatments, like galvanic tinning, silvering, gold plating, as well selective plating, in order to improve the electrical and surface behavior in critical component conditions.