CU-DLP

INTERNATIONAL REFERENCES

Egm

DLP

En

Cu-DLP

DIN CEN

CW023A

ASTM(CDA)

C12000

AFNOR

-

BS

-

JIS

C1201


MAIN CHARACTERISTICS 

Cu-DLP is a phosphorus-deoxidized copper with a limited, medium amount of residual Phosphorus. It has a good electrical conductivity and excellent welding properties.

It is resistant to atmospheric corrosion thanks to a formation of the a greenish protective patina due to the formation of copper basic salts (such sulphates, chlorides in marine environment, nitrates and carbonates).

Cu-DLP has a good resistance in in natural and industrial atmosphere. Industrial and drinking water, aqueous and alkaline solutions (not oxidizing), pure water vapour (steam), non oxidizing acids (without oxygen in solution) and salts, neutral saline solutions. Not particularly resistant to oxidising acids, solutions containing cyanides, ammonia or halogens, hydrous ammonia and halogenated gases, hydrogen sulfide, seawater.


CHEMICAL COMPOSITION

Cu
[%]

≥ 99,90

Bi
[%]

≤ 0,0005

Fe
[%]

-

O
[%]

-

P
[%]

0,005 - 0,013

Pb
[%]

≤ 0,005

Sn
[%]

-

Zn
[%]

-

Σ other
[%]

≤ 0,03


FABRICATION PROPERTIES
Cold Forming Properties
Hot Forming Properties
Electroplating Properties
Hot Tinning Properties
Soft Soldering
Brazing

COMPLIANCE
2000/53/CE ELV
2011/65/CE ROHS
2015/863/CE
2017/2102/CE
2018/741/CE
2002/96/CE RAEE

PHYSICAL PROPERTIES
Density 8.94 g/cm3
Electrical Conducivity 52 MS/m
Electrical Conducivity 90 IACS %
Thermal Conducivity 350 W/mK

MECHANICAL PROPERTIES
Temper Tensile Strength
Rm [N/mm2]
Yeld Strength
Rp0.2 [N/mm2]
Elongation
A50 [%]
Hardness
HV10
Grain size [mm]
R200 200-250 ≤ 100 ≥ 42 - -
H040 - - - 40-65 -
R220 220-260 ≤ 140 ≥ 33 - -
H040 - - - 40-65 -
R240 240-300 ≥ 180 ≥ 8 - -
H065 - - - 65-95 -
R290 290-360 ≥ 250 ≥ 4 - -
H090 - - - 90-110 -
R360 ≥ 360 ≥ 320 ≥ 2 - -
H110 - - - ≥ 110 -

Please note: the above values are to be considered in compliance with UNI-EN 1652.


TYPES AND FORMAT AVAILABILITY
Horizontal axis
Thickness da 0,2 a 3,00 mm
Widht da 340 a 1050 mm
Internal diameter 300 / 400 / 500 mm
External diameter  <1500 mm
Vertical axis
Thickness da 0,2 a 3,00 mm
Widht da 4 a 500 mm
Internal diameter 100 / 140 /300 / 400 / 500 mm
External diameter  <1500 mm
Drums
Thickness da 0,2 a 2,00 mm
Widht da 4 a 60 mm
Internal diameter 300 / 400 / 500 mm
External diameter  <1000 mm
Multistrips
Thickness da 0,2 a 1,5 mm
Widht da 4 a 60 mm
Internal diameter 300 / 400 / 500 mm
External diameter  <1500 mm

Please note: The dimensions indicated are to be considered purely indicative. Specific requirements regarding width, thickness, internal and / or external diameter, must be evaluated and agreed upon when ordering.


OTHER SERVICES

Our Company offers a wide range of additional services, helping to satisfy the most varied needs. Surface treatments, like galvanic tinning, silvering, gold plating, as well selective plating, in order to improve the electrical and surface behavior in critical component conditions.